EnviroTex Lite
Por um escritor misterioso
Descrição
EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table
EnviroTex Lite
EnviroTex Lite
Envirotex Lite Pour On High Gloss Finish 128oz : Tools & Home Improvement
Environmental Technology Envirotex Lite Kit, 8 oz.
Envirotex lite epoxy resin kit 8 oz hardens to a high gloss finish cures in 36 hours. Use it to create a hard super shiny finish. Instructions
Envirotex Lite resin kit 8 oz
EnviroTex Lite Pour-On High Gloss Finish 16oz
Open Box Envirotex Lite 02008 Pour-On High Gloss Finish 8 fl oz Craft
EnviroTex Lite® Pour-On High Gloss Finish
Experience with Envirotex Lite : r/ResinCasting
Envirotex Lite: 3.78L High Gloss Pour On Alkyd Finish :: Fennell & Gage Home Hardware
de
por adulto (o preço varia de acordo com o tamanho do grupo)